Foredom's chisel handpiece gives a power assist to carving projects in all types of wood, plastic, and plaster. This handpiece has a contoured body design that features a rugged plastic barrel and tapered aluminum ends. The easy to maintain chisel handpiece is recommended for use at low speed with Series TX, LX and SR motors. Handpiece attaches to any flex shaft machine with a standard key tip shaft.
The Chisel Handpiece must be used only in the forward motor direction.
Optimum Speed Range- 3,000-10,000 rpm.
Max. Operating Speed- 18,000 rpm.
Handpiece specifications: 6" long, 1" in diameter and weight: 4.6 oz.
This Handpiece comes with a set of 6 pre-sharpened steel cutters:
1. Gouge #3, Sweep Shallow Cut
2. Gouge #7, Sweep Deep Cut
3. Gouge #11, Sweep "U" Cut
4. Parting Tool "V" Cut
5. Chisel #1, Straight Single Bevel
6. Chisel #2, Skew SIngle Bevel
Maintenance: After every 200 hours of use you should clean and lubricate this handpiece. The old grease must be cleaned off of the interior cam chamber and replaced with new lubricant. Follow the instructions that came with your handpiece maintenance instructions.
Operating Tip: Using the chisel handpiece with a dial speed control is easier than with a foot operated control. Table top dial controls are available separately and named below.
We also offer 22 individual cutters that are sold separately. These will also fit other power chisels including Proxxon and WeCheer.
The Manufacturer's Limited Warranty is 90 Days on Handpieces.