This Rotor Saw Shape Typhoon Carbide burr is made in the USA and is suitable for all power carver units that accept 1/8" shank burrs. The rotor saw shape is a great choice for undercutting and for creating narrow or deep grooves such as between wing tips. The head has a diameter of 11/16" and a length of 3/16". Overall length is approximately 1 1/8". View Traditional Woodworker's Entire Selection of Carving Tools.
Typhoon Carbide Burrs
These burrs are used for aggressive wood removal. Their unique structurally aligned tungsten carbide points leave a smoother finish, do not load as quickly and last longer than other types of tungsten carbide burrs. Use the coarse grit (red color) for rapid and aggressive shaping and roughing out work. Use the fine grit (blue color) for general shaping and sanding. The Typhoon burrs are easily cleaned using a brass brush. Maximum RPM is 35,000 for the 1/8" shank burrs and 25,000 for the 1/4" shank burrs. Made in the USA.