 |
| |
Set of 20 Top Quality Diamond Burrs - 1/16" Shank |
|
These 20 top quality diamond burrs are made in the USA and are suitable for all hyper-speed units that accept 1/16" (Friction Grip) burrs. This set should cover most if not all of your diamond burr needs. It includes:
- Sphere Shapes - 0.035", 0.050", 0.060", 0.070", 0.090", 0.110", 0.125" and 0.175" Diameters.
- Flame Shapes - 0.065" and 0.0195" Diameters
- Tree Radius Shape - 0.050" Diameter
- Inverted Cone Shape - 0.070" Diameter
- Cone Shape - 0.100" Diameter
- Cone Radius Shape - 0.100" Diameter
- Cylinder Shape - 0.045" Diameter
- Taper Shape - 0.060" Diameter
- Bullet Shape - 0.055" Diameter
- Sharp Point Shape - 0.060" Diameter
- Round Edge Wheel Shape - 0.180" Diameter
- Square Edge Wheel Shape - 0.250" Diameter
Overall length varies between 3/4" and 7/8". View Traditional Woodworker's Entire Selection of Carving Tools.
Our American Made Diamond Burrs
These 150 grit diamond burrs are made to demanding specifications to ensure uncompromising quality. Starting with a single piece of the highest grade stainless steel, the blanks are turned to exact tolerances to ensure absolute concentricity and balance. Utilizing a proprietary bonding process, the burrs receive a minimum of 6 layers of 100% natural diamond coating. To ensure uniform diamond placement and continued absolute balance, the bonding process uses extreme accuracy in controlling the application of bonding material. As a final step, each burr is subjected to a triple inspection process including a thorough manual hand check. The end result is a top quality American made diamond burr that we believe outperforms any other burr on the market. These burrs are very long lasting and a pleasure to use. Maximum RPM 450,000. Made in the USA.
|
|
|